Licensed Architect Seal/Stamp

Arch 306.03 Licensed Architect Seal/Stamp. (a) Upon issuance of an initial license to an applicant as a licensed architect, the licensee shall acquire an impression type seal or rubber stamp of the design specified by these rules. This seal shall bear the licensee's name and number as shown on the license. This seal, signature of the licensee and date shall be affixed on all papers or documents involving the practice of architecture prepared by the licensee issued or filed for public record. (b) The seal shall consist of 2 concentric circles with the outer circle having a diameter 1-9/16 inches and the inner circle diameter 15/16 of an inch. In the space between the circles at the top shall be the words "Licensed Architect" and at the bottom shall be the words "The State of New Hampshire." In the space inside the inner circle shall be the full name of the licensee and the license number written horizontally. (c) The requirements of (b) above shall be as illustrated below in figure 3.1: Figure 3.1 Seal/Stamp (d) It shall be a violation of these rules for the licensee to stamp or seal any documents with their seal after the license has expired, been revoked or suspended or after the licensee has chosen retired status. It shall be a violation of these rules for the licensee to stamp or seal any documents not prepared by him or her personally or under his/her direct supervision. Source. #7944, eff 8-27-03; ss by #9097, eff 2-29-08; amd by #9876, eff 3-1-11; ss by #10904, eff 8-5-15