Approved Nail Technician Apprenticeship Requirements
Utah Administrative Code
Utah Administrative Code
Under Subsection 58-11a-102(6), the requirements for an approved nail technician apprenticeship include the following: (1)(a) under Subsections 58-11a-306(6)(b)(ii) and (iii), an instructor shall provide one-on-one direct supervision of a single apprentice during the apprenticeship program or one-on-two direct supervision to two apprentices during the apprenticeship program, but this does not preclude an instructor from having more than two apprentices; and (b) if an instructor has more than two apprentices: (i) the instructor may not simultaneously supervise more than two apprentices; and (ii) the same hour or hours of instruction may not be credited toward more than two apprentices; (2) the apprentice shall be registered with the Division by submitting a form prescribed by the Division; (3) the instructor shall be approved by the Division for the apprenticeship, but the instructor may not have had any disciplinary action in the preceding three years; (4) there shall be a conspicuous sign near the workstation of the apprentice stating, "Apprentice in Training"; (5)(a) the instructor and apprentice shall keep a daily record that documents the total number of hours of training, which shall include: (i) the hours of theory instruction; (ii) the hours of practical instruction; and (iii) the number and type of client services performed, and other services performed; and (b) the daily record shall be immediately available to the Division upon request; (6) a complete set of nail technician texts shall be available to the apprentice; (7) an apprentice may be compensated for services performed; (8) the instructor shall provide training and technical instruction of 375 hours using the curriculum defined in Section R156-11a-704; (9) the instructor shall limit the training of the apprentice to not more than 40 hours per week and not more than five days out of every seven consecutive days; (10) an apprentice may not perform work on the public until the apprentice has received at least 10% of the hours of technical training, with at least a portion of that time devoted to each of the subjects in Section R156-11a-704; (11) any hours obtained while enrolled in a school of nail technology or cosmetology/barbering may not be used to satisfy the required 375 hours of apprentice training; and (12) if an apprentice completes the apprenticeship and fails the NIC Nail Technology Theory Examination or NIC Nail Technology Practical Examination three times, the apprentice and instructor shall: (a) meet with the Board at the next appropriate Board meeting; (b) explain to the Board why the apprentice is not able to pass the examination; and (c) provide to the Board a plan of study in the appropriate subject matter to assist the apprentice in passing the examination.
Ask CiteLaw's AI Navigator anything about this regulation, verify citations, and research related authorities. Sign up for CiteLaw free today to get started.